How to mend ... Petrol Chainsaw Start

Ryobi RCS 3335 not running?

My Petrol Ryobi chainsaw RCS 3335 is now refusing to run. It will start on full choke but cuts out immediatel... [Read more]

husqvarna 61 chainsaw?

stripped saw,because oiler didnot work,and moved magnetic pick up,reassembled machine however it does not star... [Read more]

How can I fix my Aldi Gardenline chainsaw?

My petrol Gardenline chainsaw will not start. Fuel in the bubble, choke pulled out and switch set to 1. On... [Read more]

Petrol chainsaw does not start ?

My PWR33CCCSA Chainsaw does not start despite a new spark plug and the correct mixture of fuel , the unit is 4... [Read more]

Wear on pull starter plastic cog?

GLPC40 Petrol Chainsaw Model No. 8073. Have used this model for approx. 10 hours and have replaced pull start... [Read more]

zip-start ?

What, technically, is a zip-start on a petrol chainsaw ?

starting my stihl 023 chainsaw?

i have just purchased a shihl 023 chain saw from ebay put chain oil in filled fuel tank with 2 stroke/petrol 5... [Read more]

chainsaw will not start?

it is not the spark,or petrol i swapped carburetor over to another saw it works ok and swapped filters and sti... [Read more]

husqvarna chainsaw 142, wont tickover?

142 has been a poor starter, I changed petrol and oil 2 tmix, and set spark plug gap to 20 thou. Got it to st... [Read more]

Chainsaw Stalls?

Hi, I own a McCulloch Dakota 442 petrol chainsaw. I can start it from cold. But as soon as I pull the tr... [Read more]

Stihl MS180 chainsaw running problems?

My Stihl MS180 chainsaw starts ok and runs fine under no work but after you have finished a cut through a log ... [Read more]

Chainsaw won't start?

Every time my chainsaw runs out of petrol and I re fill it, it won't start. I have to change the mixture setti... [Read more]

gpcs 42cc petrol chainsaw wont start?

where can I purchase an Ignition Assy for the above this unit is located next to the Magneto and has an HT le... [Read more]

Wrong oil mix and what damage it caused?

Hi I ran my Husky chainsaw for two tanks on the wrong oil/petrol mix (I did 500:1 instead of 50:1 doh!) I ... [Read more]

how to get going?

petrol mculloch chainsaw just died cannot get it to start

mac 335 chainsaw?

how can I start my chainsaw - has new plug, clean petrol but no compression

huscarvarna chainsaw ?

Iwas using my chainsaw and it stopped abruptly so i checked the tank for petrol ,when I took the cap off the p... [Read more]

Seized Ryobi won`t start after freeing?

Ryobi Chainsaw PCP 4040 16" will not start after mistakenly mixing chainsaw oil in petrol 50-1,ran for 10 min... [Read more]

i have good spark at the plug and petrol but i cant start it ,has fired a?

i have a mccuogh chainsaw agood spark at the plug and i have put petrol down plug hole but still wont start ,b... [Read more]

Chainsaw will not start?

Hi, I got this chainsaw of my mate and it will not start. He told me that it was the ignition switch ... [Read more]