How to mend ... Need Adjusting Screw

thorn m44 boiler fault?

pilot light will not change with adjusting screw.

Sukida roma running problems ?

Hi. My girlfriend has a sukida Roma Sk 50qt -9 and since fitting a full exhaust system the bike had slowly ove... [Read more]

Thread getting jammed Singer Stylist 7258?

Thread keeps getting jammed, causing birdsnesting, eyelashes and skipped threads depending on whether it's low... [Read more]

Help to get correct part numbers for Dellorto Carburettor?

Hello :) I have an Atco Balmoral 14SE with a Tecmuseh AQ 148 engine witha Dellorto carburettor. I am uns... [Read more]

GLPHT/10 pettrol Hedge Trimmer?

my GLPHT/10 Petrol Hedge Trimmer will not tick over when started i have replaced the spark plug to no availl .... [Read more]

Why does the cistern overflow?

My Villeroy & Boch toilet cistern flushes ok, but when it refills & the float mechanism cuts the water inlet o... [Read more]

Adjusting plastic screw type item to activate clutch ?

The cable has stretched and does not activate clutch to self propel mower

door catch not engaging on Indesit WIE 167?

The door catch on my washing machine is still in one piece, and the spring is working, but I can't get the doo... [Read more]

adjusting screw flymo Pac a shredder lost?

Hello I lost the adjusting screw to adjust the cutting plate of my Flymo Pac a Shredder. My question is: Is t... [Read more]

Where is the revs adjusting for Zafira 1.8 Automatic?

Hi, My Vauxhall Zafira cuts out sometimes when brake is applied or foot taken from accelerator especially when... [Read more]

Talon mixture screws?

I too would like to adjust the mixtures on my Talon blower AB 3201. I see the advice for adjusting, which I'm ... [Read more]

need adjusting screw?

for mcc 436 the adjusting screw is broken

Burning 1 speed Kenwood mixer a701a?

Hello, I've read a lot about this issue but adjusting the screw does not seem to do the trick. The motor se... [Read more]

How to get an electric doorbell ringing?

I have installed an old style interrupter electric doorbell (connected via transformer to the mains) which buz... [Read more]

hedge trimmer does not run unless on ckoke?

My ryobi petrol hedge trimmer starts ok, and runs on choke ok, but a soon as the trigger is pulled which switc... [Read more]

material will not feed through machine?

i put the pressure foot down on the material but when i begin to sew the machine will not pull the material th... [Read more]

Chef Baronness Wall Oven?

Can the clock on the wall oven be adjusted ?, it is loosing time about 3 minutes a day, I hope there is an adj... [Read more]

Adjusting carb on a Troybilt TB90BC? ?

I purchase the correct tool for this, and there's three screws. 1" the Phillips" is obviously the idle. The ot... [Read more]

17.5 carb trouble?

ive just fitted a 17.5mm carb to my yamaha bws. it starts without the choke and revs high. ive tried adjusting... [Read more]

Danesmoor 15/19 oil boiler sooting up?

My oil boiler is sooting up, i have a adjusting screw marked P(pressure) do i need to turn the screw to + or t... [Read more]