How to mend Jcb 3cx

1

JCB 3CX Backhoe Overrun?

What is the most probable cause of backhoe overrun when slewing? How do I fix it?

11

loss of power jcb 3cx?

when on the road with my 3cx it looses power and is very slow espicially on a hill. Ive cleaned from the tank... [Read more]

4

How can I fix my Jcb 3cx tansmission shift?

my jcb 3cx starts, transmission oil is full, but there is no response on forward or reverse. how do I fix this... [Read more]

15

JCB 3CX will not move forward or back?

Hi, I have a JCB 3CX backhoe, engine runs fine, machine will work for 10-30 minutes then it will start to loos... [Read more]

1

jcb 3cx 1990 Grey Cab?

I have a dashboard wiring problem.I bought a Dashboard module which has 2 plugs connecting. The original has 4... [Read more]

1

JCB 3CX (1990 grey cab) hydraulic problem?

1) Struggle to raise front loading bucket on main rams when bucket has a load in it. Seems ok without any weig... [Read more]

1

gear problem: 1st 2nd 3rd 2nd the 4th gear does not enter?

hi, i own a jcb 3cx december 1999, 2000 model, powershift, the problem is the 4th gear is not currently enteri... [Read more]

JCB loader lever fault, how do I fix it?

my JCB 3cx, H reg, has a fault with the loader lever, if you let go of it, it doesnt stay in the neutral posit... [Read more]

4

I need JCB 3CX parts manual?

I need JCB 3CX parts manual all models

1988 JCB 3cx 2 wheel drive backhoe, Power steering troubles?

I just brought a JcB 3cx 1988 2 wheel drive backhoe and the power steering pump was leeking on the big feed ho... [Read more]

1

How can I fix my 1986 JCB 3CX 4WD sitemaster- gearbox problem?

Gearbox loosing transmission fluid from drain hole at bottom of bell housing (pouring out). I am assuming a se... [Read more]

1

5.what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

Thankyou for your time,knowlege and help,Mr.Toad. Very much appreciated. Yes, i agree,its looking gearboxish, ... [Read more]

1

4. what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

Thanks, MrToad. The shiny plunger is returning fully into the bushing[threaded with nut],with no shiny left ex... [Read more]

2

3. what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

Thankyou for your help,Mr.Toad. When clutch pedal is released the 'rod' returns back into the threaded 'shaft... [Read more]

1

what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

No forward/reverse drive.Tor/conv fluid at correct level now,however it was much too high previously, Mr Toad.... [Read more]

1

what is wrong with transmision/torq-conv on my Jcb 3cx 2 wheel dr.1981?

I`m not getting any forward/reverse drive when operating forward/reverse lever in all gears[4].This problem oc... [Read more]

5

Locating hydraulic problem on jcb 3cx 86 approx?

Front bucket creeps down on the crowd, there are no oil leaks, any imput would be much appreciated

2

JCB 3cx Contractor Transmission?

I need to find the oil pressure switch on the JCB 3cx Contractor. Transmission number 442-00330/4/247.

3

JCB 3CX?

I am trying to get the rev clock working on my 3cx Is it wired from the altenator?

6

jcb 3cx 1990 capacities?

Can anyone answer the following questions about a 1990 jcb 3cx grey cab. 1. Capacity of Gear Box (it has a ... [Read more]