Mend > Sewing Machines

What do I do about the alignment ?

What do I do about the alignment on a sewing Machine, needle hits the metal.

1

how to repair merritt sewing machine CR303 foot controller?

One of the electronic components inside the clam type foot controller went bang. The controller has a date on ... [Read more]

1

how to fix power cord on singer 237?

trying to replace power cord and foot control cord

1

Jones 641 electric sewing machine?

I bought this machine advertised as a good work horse ... motor whirrs and sews for a short time and stops s... [Read more]

how to fix the chains on pff 145?

How fix the chain on my pff 145 sewing machine

Manual?

Where can I find a manual for a Olympia sewing electronic machine model sza-1007e

1

The thread breaks frequently. ?

In My Singer sewing machine the thread breaks down frequently. How to stop this problem?

2

How to fit a replacement timing gear on Singer 449?0?

The vertical gear on my Singer 449 has crumbled with age and I have bought a replacement, but I am now faced w... [Read more]

2

Lervia KH 4000?

I've followed the book how to set the tension on thread and contact pressure. Also tried different length sti... [Read more]

how cant I fix my Crofton deep fryer?

I have a Crofton deep fryer and the power light comes on but it dont heat up, any idea what might be wrong.

1

Where do i oil my Kenmore 6 stitch model # 158 13400 ?

I have no manual & need to know where to oil my Kenmore 6 stitch model # 158 13400 sewing machine. Where & how... [Read more]

2

Singer model 1130 main drive wheel very stiff ?

Hello, my machine was working just fine and then the main drive wheel became very stiff, causing the machine t... [Read more]

1

My sewing machine foot pedal will not switch off the motor?

I have an old PFAFF 30 electric sewing machine. it works with a foot pedal. It has a Sew Tric motor and presu... [Read more]

How can I open my Frister and Rossman 804 to oil it?

I cannot remove the the arm cover to then remove the face cover. Booklet instructions are insufficient.

2

Janome MC3000 noise?

My Janome 3000 makes a squealing noise when it is running at a high speed. It seems to come from the motor are... [Read more]

Lervia kh4000?

Could anybody tell me at what numbers the buttons need to be on to sew as I do not have manual

Lervia KH 4000?

My daughter cannot get the needle to bring up the lower thread , I have checked the lower spool is in the corr... [Read more]

3

How can I fix my Frister Rossmann Sewing Machine?

The motor and hand wheel are turning OK but the Take up Lever is fixed and does not move up and down. The prob... [Read more]

Kenmore sewing machine model # 158.14100?

Need to change large motor drive belt. How do I get the old belt off, so I can put the new one on?

manual for harmony 2039?

hi i have newhome harmony 2039,but i don't have a manual with it .anyone help me please'