Mend > Chainsaws

How can I set the timing on a go kart motor?

I have an MC-8. I've set the gap at 0.018, but now need to refine it to be sure it is firing at 25 degrees BT... [Read more]

velcro pad?

were can i get a replacement sticky pad for my sander

how to fix chainsaw?

how can i fix a hairline crack inside a gas tank on a husquvarna chainsaw

collets and bits/powercraft routers?

how do we view and order collets and bits for powercraft routers.

chain saw not rotating to cut?

I have borrowed an Electrolux/McCulloch electric chain saw Model ES 414. After working OK for about 10 minutes... [Read more]

how can i fix my gardenline gs2000?

where can i get carbon brushes for my gardenline gs2000

How can I fix my Stihl 017 chain saw?

The automatic oiler for the chain and bar is not lubricating properly. Is there some way to check if there is ... [Read more]

How can I fix my McCulloch Titanium ES2200 chain saw?

My electric chain saw has stopped working. I have checked the fuse, checked for loose or broken wires and test... [Read more]

rope won't recoil back into the housing?

rope won't recoil back into the housing of my km55r Stihl trimmer

How do you set the H & L screws on a small carb?

I had to close the H & L screws to dry it out and get it to start. Now I need to set them to get my 36CC 16" C... [Read more]

oil to cutterbar?

sthil ms170 oil is not reaching the cutter bar,have checked filter but how can I tell if the pump is malfuncti... [Read more]

what is the magneto gap setting for eager beaver 3.4 chainsaw?

What is the setting for the magneto on a Eager Beaver 3.4 Chainsaw?

parkside chainsaw?

where do u get new parts for parkside chainsaw,ie internal drive sprocket

pro24ccbva?

hi can you help me find a new plastic bubble the one that primes the petrol to start . its a pro 24cc bva gard... [Read more]

where is the regulating bolt for the chain oil feed?

There does not seem to be enough oil feeding on to the bar. The manual says, the oil feed is reduced to a mini... [Read more]

question for carb kit?

Can anyone help me put a carb kit together for my ms200t. I know this probably wont fix my problem, but I can... [Read more]

what is the tuning settings on the carburettor?

what are the fuel mix or tuning settings on the carburettor.there are 3 screws.which one is which.

how can I restart chain bar oil pump?

maccat 839 oil pump stopped working - how do you access the pump?

what spark plug for eager beaver 2014?

Lost the spark plug for McCulloch Eager Beaver 2014 what spark plug do I need?

Replacement Battery charger?

Where can i get a charger for my battrey drill it is a pdd-1800 drill ? Can you olso give me the cost?