Mend > D.I.Y Tools

powercraft 160w engraving tool?

where can i get a replacement variable speed switch assembly for this combitool.

1

14.4 cordless drill driver. will not work?

Not used drill for 18months will now not charge , is it battery or charger .It was working when put away

Performance Power Planer NLH801PP - Blade Adjustment?

Does anybody know how to set the blade correctly on this great tool?

1

erbauer chuck?

The chuck on my erbauerR11W03 drill will not open or close. Suggestions?

Lak of preasure and on off switch?

I have very little preasure to my power craft power washer model 028525 ean - code 2508 8137 also the on off s... [Read more]

2

I need to identify a part on my chain saw that isn`t listed in my manual ?

My chain saw won`t engage and I`ve taken it apart and found the plastic panel has 2 holes that are stripped. I... [Read more]

f/r push button on ryobi cdi 1801 drill?

how do you change the forward/reverse push button on ryobi CDI 1801 drill?

3

Where do I get a battery charger for a Macallister Drill?

I need a battery charger for a Macallister Cordless Drill (12v)) Not had much luck as yet.

1

Pro 330mm CLM330BT Thicknesser fails to start?

I bought a Pro 330mm CLM330BT Thicknesser some time ago from B&Q. Until recently it has performed flawlessly. ... [Read more]

1

safes?

I have a B&Q small safe the batteries have run out & I have lost the key, can someone tell me how I can open i... [Read more]

battery charger?

can i buy a performance power battery charger pcu24h and were do i get it or can it be fix

dremel 300 stops when in high rps, why? ?

Help, I bought my dremel 300 last year and have not used it intensively, but a few days ago, while working wit... [Read more]

where can i find the clutch cover,part#530037803?

where can i find the clutch cover(part#530037803),for my 16'' craftsman chainsaw(model#358.351062)???sears rep... [Read more]

2

Blackspur planer belt bb-pp100?

can you give me the web site to get spare belt drive, the hong kong one will do

My Kango 637 stopped hammering. Any sugestions? ?

My Kango 637 stopped hammering. Any sugestions?

My Kango 637 stopped hammering. Any sugestions? ?

My Kango 637 stopped hammering. Any sugestions?

grimebuster faulty?

Heats up to boiling point then no steam.

1

power craft battery drill need new battery model hl dt 180?

drills battery completely dead tried charging will not respond model number hl dt 180

1

can i repair my angle grinder the bearings has worn?

my bearing on my grinder has worn is it possible to replace it.

24v extreme challenge 24v drill?

i have mislaid the charger and would like to buy another