Battery replacement,B&Q Performance Power Drill,18v?

Hi dad told me to find battery clm 18v go bat

ilirjan.balaj
November 2014

im looking for a replacement battery for my power pro

paul
April 2014

you can buy a roybi 18v battery and take the cells out and put the in your battery case, but your my have to adjust them to fit. brian

brian
March 2013

I have a performance power drill with battery pack PB18H and the charger went missing. I gambled on a Draper charger from Amazon UK - part number C182A as it looked like it would fit. Just arrived and sure enough it does (someone had mentioned that some Draper drills are actually the same as PP). Cost about £9 and solved my problem!

Terry Gibson
January 2013

From Sertronics on 01922 624412

brandit2001uk
August 2012

i need a 18v battery part no. CLM18NICDSC
Any ideas i have two but neither will charge any help would be great thanks

J Masters
June 2012

I am looking for a battery charger for performance power tool set adap model no hka-2430bs 1300 mah ni-cd battery clm18vcn please help

Patsy
May 2012

Hi there, Sorry this is a bit late- The B&Q Pro range is a rebadged Ryobi. There is a new range of battery packs from Ryobi including a NiCad and a Li-Ion which appear to be the same fitting. Type numbers are BPL 1820 and ABP 1801. They are branded One + (or something similar). These are new to Western Australia, anyway!
Regards,

Bobcat
September 2009

Hi, I have a similar problem; bought a combo pack (H-Drill, C-Saw & J-saw) from B&Q a couple of years back. I have two batteries with the pack one which is not holding charge at all and the other has a very low lifespan (compared to how long they did last).

The chargers (PP Pro) can still be bought from a few B&Q stores, but none are stocking replacement batteries (these are the 18V with 4 prong connection in a shielded housing). It seems the design of battery pack has changed, and worse still these are being phased out for the new Li-Ion reachable packs.

My local B&Q in Wigan is selling of some old battery packs for a reduced price; these however have a different connection but are same voltage and type (N-Cad). If they still have some reduced ones this weekend Im going to get one to see if the physical bat pack (inside the case) can be modified to suit the required connection.

(Being technical: the bat cells are connected by metal strips which are spot-welded to the terminals – I know this because one of my bat packs stopped working and after opening the problem was found to be a broken metal strip – this was relatively easy to fix by soldering a new wire connection)

Dave T: it may be worth you opening the bat case to have a look – assuming that is you have a dodgy bat rather then actually need one!!

Jamie
October 2008

Hi I have a similar problem, I have a battery but no charger. Cannot find a seller anywhere? Perhaps if neither of us resolves the problem, we could sell the missing component to the other to ensure at least one of us has a functioning drill? Whereare you based? How much did you pay for the drill?

kn
August 2008