I have and electric Ryobi 132r trimmer and I can't find my manual, how do I?

THE Q IS HOW TO REMOVE THE TRIMMER HEAD- NOT HOW TO FILL AN EMPTY HEAD1 the trim line is still in the head; it just will not come out. how to remove the head, fish out the remaining line, and start over??

ed
June 2008

Here's a link to the manual:

http://www.wedophones.com/Manuals/StringTrimmers/Ryobi%20132R%20Electric%20Grass%20TrimmerPlus%20with%20Manual.pdf

Charles
June 2008

I have one of this trimmers. It is simple to replace the line.
-First line up the arrows on the bottom of the spindal.
-Then feed the line back in one of the holes in the side of the spindal (this is the same hole that the cutting string comes out of).
-You will see the line come out of the bottom of the spindal.
-Take that line a place it in the whole on the bottom of the spindal.
-Leave about 9 feet of string hanging out of the weed eater (do the same with the other side).
-Then turn the inside wheel (I can't remember if it is clock wise or counter clock-wise but it will only turn one way) most of the string is rolled into the spindal.
-Cut the string of about 5 inches out of the weed eater. You're ready to cut!

Kirk
July 2007