might sound silly but check water pipes are not kinked! and if not yhen yes pressure switch4 defo ;take scinny pipe of side of pump and trace 2 switch at top of washer disconect ;claen out make sure can blow down!!!!
dave
May 2007
hi the pressure switch is under the lid usually round in shape with some wires pluged on to it,also a tube running off the bottom,try these
1) remove the tube from the end of the switch and blow down it
2) have a close look at the tube it may have a hole in it if so replace
3) replace the switch (all these with power off)
Anymore questions or parts required http://www.freewebs.com/msdapudsey1
Just go to the forum
phil grimshaw
May 2007
Automatic Answer
We may have found other answers which could help you.