no fast spin?

The water level pressure switch could be blocked, if the machine sees a high level it will not spin out a high speed. looking in the back RHS you will see the small pipe attached to the pressure switch. remove it at the switch and simply blow through the pipe to clear any blockage.
SAFETY FIRST ALWAYS ENSURE THE MACHINE IS ISOLATED FROM THE MAINS.

john
June 2007

hi this can be repaired by sending your lower circuit board to m.s.d.a.(pudsey) unit 2b sunny bank mills 42/45 town st farsley leeds ls28 5uj next day return£59.00 or call on 01132561973

phil grimshaw
September 2006