how to fit new door gasket on my Hotpoint/Electra 17057E?

hi i presume this is a creda from the model no
the front of the machine has to come off
remove the outer rubber fastener,and pull the rubber off,remove the powder tray and undo the 3 or 4 screws behind it,remove the front control panel,at the top of the front panel 3 screws remove,at the bottom of the front panel remove the kick plate (if it has one),remove the 3 screws holding the front on,you can now remove the front panel and the rubber and replace
Anymore questions or parts required http://www.freewebs.com/msdapudsey1
Just go to the forum

phil grimshaw
April 2007