Recent: Will I need to replace my garden tap?

Mend > Fan Heaters

Mend Dimplex 3 Old Little

Dimplex Multifire 3 years old , little used?

The heating element comes on when I only want the glow on and the metal gets hot as the blower only comes on as the element switches off . There is a hum as if something wants to happen then it stops and the element goes on again. Can't just use the glow. Electrician recommended by Dimplex wants £149 call out!!

Eve
December 2014
Thanks Toptrish for reply

Eve
December 2014
Unfortunately I have not worked on this model but I get the impression that it is wired wrong internally,I might be wrong it could be a glitch with the PCB.Did it work ok at first?

toptrish
December 2014
The model number is MFS 12LE
I have only used the heater a couple of times . I would like to just use the flame effect without the heater but that's the problem , the heater switches on and off . The charge is for call out,parts and labour .

Eve
December 2014
This is an unusual set of circumstances,can you post the model number,is that call out fee all in or are parts extra,it seems a bit exorbitant.My company only charges £48 call out plus parts

toptrish
December 2014
Amazon will sell you a 2kW Dimplex fan heater for £23 - post free - you could buy 6 of them for the cost of the call-out fee.

Good luck...
December 2014

Related Questions ...

Mend will given thanks
2

scantronic 9800 alarm a reply will be given thanks?

Howdy, I own a pub/ pool hall upstairs and I'm having trouble with alarm going off at early hours in the morni... [Read more]
Mend heater repair thermostat
1

flames work, fan works, no heat?

We have a Dimplex Lincoln model that is only 3 years old, we only use it in the winter, evenings and over the ... [Read more]
Mend combi heat exchanger sensors
6

Ideal Combi Logic boiler "L3" fault. ?

Whenever the temperature knob is turned up higher than half way, the boiler shuts down, flashing L and 3. Have... [Read more]
Mend boiler heating Worcester
1

24i worchester combi?

my boiler is less than 3 years old has had almost every part replaced and still switches on stays on a little ... [Read more]
Mend performance power model
2

how can i mend my performance shredder?

i have a performance power quiet garden shredder model PWR2100QSA about 3 years old little used and the main O... [Read more]
Mend washing machine control board motor
1

Beko WMXD760W doesnt do anything that requires the drum to turn!?

Hi there, My Beko washing machine is not working. When I select a program and hit the Start button, it do... [Read more]
Mend wiring cables connections
4

old wiring - new rose?

My old wiring is a little different. There are two thick grey cables in the ceiling each with a black and red... [Read more]
Mend Bissell Proheat Cleaning
5

bissell proheat 2x perfect except won't spray to floor?

I TOO have the same issue as I've read throughout the posts in this forum regarding the ProHeat 2X not sprayin... [Read more]
Mend van running please help
1

Escort 1.8TD Van running rough - PLEASE HELP!!!!!?

Hi, I have a 99 ford Escort 1.8TD (non intercooler) van. Have owned for about six months. It has recently sta... [Read more]
Mend boiler heating replacement
1

changing to combi?

My conventional Potterton boiler is over 15yrs old and British Gas want over £3,000 to change it. I'm now th... [Read more]
Mend zanussi electrolux essential 1200
3

Zanussi Electrolux Essential 1200?

I have this washer/dryer - it's about 2-3 years old. Has recently developed a fault. Started as not returning ... [Read more]
Mend How to mend it?
1

Static Electricity?

I used my 10-year-olds Mp3 player and then got little jolt of electricity in my ears through the ear buds. Eve... [Read more]
Mend washing machine heating element drum
1

Problem with heathing element on hotpoint aquarius wf240?

Hope you can help. One of the paddles inside my drum had sheered off, so I ordered a replacement. When it ... [Read more]
Mend ago bought decided
3

Little used E418 Trimline x trainer... no power?

Hi, 3 years ago I bought a Trimline E418 X trainer. Having been made redundant recently I decided it was hig... [Read more]
Mend How to mend it?
1

How to fix a Mountfield Laser 3.7hp prisma, wont continue running? ?

Hi i have a 16 year old Mounfield laser 3.7hp ransomes mower and just recently it kept cutting out! after repr... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Fan Heaters ...