Recent: Safely remove screen protector from a Macbook Air?

Mend > Dishwashers

Mend Fisher & Paykel DW691EDSS Dishwasher Fault Reset

fisher and paykel nautilus DW691EDSS fault (reset flashing 6 times)?

my fisher and paykel nautilus is stopping and flashing reset, 2mins into its cycle. Water is filling and stops when full but all other action then stops. It will only allow reset and starts same thing again. Can't figure this out at all can u help?

Steve Reddick
August 2014
6 flashes is an error code when it thinks no water has entered. Either a faulty flow meter or a faulty pressure switch. Take the left side panel off and the flow meter is down low connected to 2 hoses. Easy & cheap to replace. That is the usual cause of any fill problem.

Lincoln Appliance NZ
September 2014

Automatic Answer

We may have found other answers which could help you.

Click here for Dishwasher Fault Reset

Related Questions ...

Mend reset dishwasher fault
1

How to reset anti flood valve on JL dishwasher?

The dishwasher has a fault no.30 which is the anti flood valve is on how do we reset the valve? John Lewis dis... [Read more]
Mend smeg dishwasher flashing
2

How to reset the acquastop failure?

I have a Smeg D16012 dishwasher which has the above fault lights flashing which is basically a water leak, I n... [Read more]
Mend fault cycle switched
1

Fault on my beko dishwasher?

Our dishwasher has finished it's cycle but it just makes the whirring sound before it switches off! Can you ad... [Read more]
Mend dishwasher fault reset
1

how can i fix my whirlpool adp 6830?

dishwasher stopped mid cycle, no fault code displayed...hav previously been able to reset it with a long press... [Read more]
Mend dishwasher stuck sensor
1

My dishwasher is stuck mid-cycle what can I do?

My problem is similar except I have the DW5410 when I reset the machine after checking all pipes were clear an... [Read more]
Mend dishwasher fault filter
4

My CDA CW494 dishwasher rotor is not spinning?

Hi, We have a built in CDA CW494 dishwasher that has recently developed a fault. When a cycle is selected it ... [Read more]
Mend error 10 seconds
2

Whirlpool ADP962 failure - Error Codes?

Dishwasher started unattended and after 10 seconds went to a flashing power light state. Tried holding power ... [Read more]
Mend dishwasher integrated fault code
2

Fisher paykel fault code for integrated model, what does it mean?

3 lights are on inside on my integrated fisher paykel dishwasher. the heavy wash, the fast wash and the rinse.... [Read more]
Mend dishwasher kenwood e3 error
1

Kenwood Dishwasher KDW 243A E3 Fault?

E3 keeps bleeping and flashing - Can someone help me? Been looking for reset button but not sure where to fin... [Read more]
Mend cda dishwasher reset
4

How can I fix my cda cw448 dishwasher?

Fault code E1 Acquastop failure, how do I reset / repair this fault?
Mend dishwasher overflow fault
2

how can i fix my indesit idl530 dishwasher?

i have recently moved house, replumbed in my dishwasher and it worked perfect for the first two - three times ... [Read more]
Mend dishwasher drain bosch
2

Bosch dishwasher fault?

Bosch sgs5312gb/12 fills and drains at the same time also the wash pump runs and also there is a small dot in ... [Read more]
Mend dishwasher leak fault
1

DIPLOMAT DISHWASHER NOT DRAWING WATER?

MY DIPLOMAT DISHWASHER STARTED TO LEAK WATER FROM THE BOTTOM OF THE DOOR, AND NOW WILL NOT DRAW IN ANY WATER A... [Read more]
Mend fault code dishwasher reset
1

Can you identify fault code?

My integrated diplomat dishwasher had a problem fault showing 4 lights. I emptied the water and tried to reset... [Read more]
Mend dishwasher fault repair
1

How can I fix my ADP8332 dishwasher?

Machine keeps displaying fault F2 after a few minutes use, I reset it then it happens again. Any ideas?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Dishwashers ...