Recent: Lg vcr?

Mend > Convector Heaters

Mend Be Modern Detroit Fire Switched Heat

Be modern detroit electric fire?

The fire is fine when just on flame effect but when it is switched to heat mode it becomes very noisy. Any thoughts?

Alan
November 2013
Be ModernBe Modern DetroitHeating, Convector HeatersFire Switched Heat
Usually these type of motors have bushes not bearings and are not repairable, you have to change the fan as a complete unit, but as a rule the bearings do not wear out the noise could be the fan is out of balance because it is off center and can be pushed back quite easily,or it could have moved sideways along the shaft,again easily sorted

toptrish
November 2013
Thanks. Can these be replaced?

alan
November 2013
yes is the bearings in the motor that are worn,very annoying noise

mm
November 2013

Related Questions ...

Mend bottom oven top oven
2

My bottom oven is overheating the top oven ?

My duel fuel Stoves Newholme cooker DF600sl DOm double oven gas hob working perfectly. When I heat the electri... [Read more]
Mend work hot water
3

glow work swiftflow 75/80/100?

I have no hot water or CH. Problem started after removing a radiator to decorate a spare room. Low pressure li... [Read more]
Mend heater repair vents
3

dimplex opti-myst fire problem with heater?

the heater on my fire is running even when switched to flame/smoke effect only, it will switch from 1kw to 2kw... [Read more]
Mend boiler heating hot water
1

Potterton Netaheat - no heating without hot water?

Boiler will only fire up when "hot water" selected on controller (EP2002). When hot water is on, radiators al... [Read more]
Mend dimplex fire not
1

Dimplex Horton HTN20BLK fire - fan not working?

My Dad's fire is not working when the fan heater is switched on. The elements seem to be heating up OK there ... [Read more]
Mend help ring concept
1

How to get help for faulty cooker ring?

I have a concept 361e, bought 7years ago. The back left hob has never worked properly eg it has never been pos... [Read more]
Mend boiler heating thermostat
2

Potterton Netaheat Boiler stopped working?

Hello, I have a Potterton Netaheat Boiler with Potterton EP2002 Controls and Honeywell Thermostat. Last night... [Read more]
Mend heat works fine
2

My bolier won't heat water unless the central heating is switched on?

My central heating and hot water system works fine when the heating is on. If I select hot water only... noth... [Read more]
Mend boiler heating pump
1

Potterton Neta Heat 10-16 Mk2 ?

When switched on, it takes too long (about 10min or more) to fire while pump and fan working straight away. Cu... [Read more]
Mend oil boiler fire heating
2

Oil Boiler will not fire up after changing thermostat controller?

Hi, I have an oil boiler (Worcester Danesmoor 15/19), which I use for the heating (I use the electric for the... [Read more]
Mend combi radiators pressure
1

No hot water or radiator heat?

Yeaterday our combi boiler Worcester 241 modes started banging. We switched it off, pressure has been dropping... [Read more]
Mend boiler heating fault
1

ideal icos m3080?

My ideal icos is only two years old and for some reason it just wont run. ita a conventional boiler on a press... [Read more]
Mend baxi 100 flow switches
2

baxi bahama 100 combi knackered again-advice requested?

After several flow switches and a new PCB over the years my Baxi boiler has developed another fault. I am assu... [Read more]
Mend boiler central heating radiators
3

No CH with Potterton Puma 80?

I have a problem with a Potterton Puma 80 in that the CH does not appear to be working and there is no heat go... [Read more]
Mend central heating combi boiler heat exchanger
1

the heating on my valliant vcw 242e combi boiler will fire up?

the central heating on my Valliant VCW GB 242E combi boiler does not fire up when the heating is switched on, ... [Read more]
Mend plug light screen

Dimplex 403BT convector heater?
Mend potterton gas fire

Potterton ledger super gas fire?
Mend water heater heating error code

What is Error Code A2 on Ariston water heater?
Mend trimmer head remove

Worx trimmer head removal?
Mend thermostat heating cuts out

What is wrong with my Valor Dream electric fire/convector?
Mend Heating, Convector Heaters

Dimplex duo heater?
Mend storage heater Dimplex reset

How to reset Dimplex storage heater CXL5N?
Mend e1 error code

E1 error code ?
Mend central heating pressure radiators

How can I fix my Worcester 24CDi Boiler's low pressure?
Mend reset heater fan

Looking for reset button on dimplex convector heater DX25F10?
Mend Heating, Convector Heaters

igenix?
Mend 2005 doesnt up

Hi all, I have an dimplex xms713n 2005 model. It doesn't work/heat up?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Convector Heaters ...

Related Categories

Mend Fan Heaters
Fan Heaters
Mend Home Heating Systems
Home Heating Systems
Mend Oil Filled Radiators
Oil Filled Radiators

Topic

Detroit Electric Fire - Noisy Heat Mode