Recent: Will I need to replace my garden tap?

Mend > Chainsaws

Mend Partner 351 Oil Chain Tank

my partner 351 chainsaw won't oil the chain?

what wrong with my partner chainsaw it won't oil the chain, I've blew out the tank and the lines with an airline but still no use.

Jim
July 2013
Hi. Don't know how far you have stripped it down here is a few ideas. Remove bar and chain . Start saw and rev a few times if no oil appears its possible your drive to the pump is stripped. If oil does appear on side casing its a bar fault there is a hole on the bar that lets oil on to the chain .This is blocked clean bar channel and hole.

Michael
August 2013

Automatic Answer

We may have found other answers which could help you.

Click here for Oil Chain Tank

Related Questions ...

Mend problem full appear engine
5

ryobi4040c2 oilpump problem?

the oil tank is full the oil pipes appear clear and when the engine is running no oil is visible on chain or... [Read more]
Mend chainsaw stihl 2-stroke
1

starting my stihl 023 chainsaw?

i have just purchased a shihl 023 chain saw from ebay put chain oil in filled fuel tank with 2 stroke/petrol 5... [Read more]
Mend chainsaw bar chain
4

how can i fix my husqvarna 235 chainsaw?

when bar oil tank is full of oil it does not oil the chain at all
Mend petrol oil air
1

My chain is not oiling on my ms200t how can i fix it?

Tried petrol in oil tank and washed it out no joy also tried air forced in the hole still no joy, any ideas
Mend plastic pipe connected
1

Where is the plastic pipe for the chain lubrication connected?

I have a PWR1800CSC electric chain saw. The chain was not properly lubricated and when dismantled I found the... [Read more]
Mend chain not oiling
2

chain not oiling?

stihk 017 wont oil . first drained and flushed the oil tank 3 times. then took air hose to the oil pump port t... [Read more]
Mend chainsaw motor chain
3

ryobi chainsaw ?

oil from bar lube tank is being sucked into the moter and out of the exhaust and not onto the chain.
Mend How to mend it?
1

ryobi pcn4040 chainsaw automatic oiling inoperative?

Although the oil tank is full no oil comes out to lubricate the chain. Presume there is a blockage somewhere, ... [Read more]
Mend chain into gas
2

I poured bar and chain oil into the gas tank,what do I do now?

I poured bar and chain oil into the gas tank of my chain saw,what should I do now?
Mend appear working full
1

Husqvarna 141 Chain Oiler?

The chain oiler does not appear to be working. After running a full tank of gas, no oil was needed. When the b... [Read more]
Mend chainsaw bar oil Homelite
5

homelite super 2 chainsaw--- no oil going to chain?

I just bought an old homelite super 2 saw with adjustable oiler. I can't figure how to oil the bar/chain. Che... [Read more]
Mend chainsaw chain engine
1

McCulloch 436 no oil supply to chain?

Chain oil tank is full, but no oil getting to chain. I have removed chain sprocket cover, removed chain, reved... [Read more]
Mend How to mend it?
6

chain saw carburator model "blitz"?

my chain saw does not give gas to the chamber when i let it stand for a while , it take many 30-50 times of pu... [Read more]
Mend pump chain chainsaw
1

How do i remove oil pump for chain from dolmar chainsaw?

I have a Dolmar saw and the oil pump pickup tube leaks at the oil tank. I have disassembled saw as far as pos... [Read more]
Mend chainsaw homelite repair
1

how can I fix my homelite d3850b chainsaw?

I have been using my saw up to today without any problems.My bar oil is not lubricating my chain and bar anymo... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Chainsaws ...