Recent: Fix food processor motor?

Mend Chainsaws

Mend Garden Tools, Chainsaws
Find out how to mend it for free.
Ask Question
Mend Garden Tools, Chainsaws
Click here to mend chainsaws

Mend chainsaws ...

Mend Garden Tools, Chainsaws

Need age and parts for homelite?

I have a homelite textron UT 10618a serial number 7F1601385. I was hoping someone could help figure out what y... [Read more]
Mend Garden Tools, Chainsaws

McCulloch Power Mac 310?

McCulloch Power Mac 310 ignition coil p/n 216599 (223706-1). Where to find?
Mend Garden Tools, Chainsaws

Xh2xs.0454ra?

Replacement chain XH2XS.0454RA
Mend spark carb air

Chainsaw missing gasket & plug gap?

pwr33cccsa chainsaw spark plug gap? Is there a gasket between carb and air filter plastic housing?
Mend Garden Tools, Chainsaws

Mountfield RS100?

Hi, my mountfield RS100 was recently misfiring so i removed the carburetor, disassembled it, cleaned it and re... [Read more]
Mend Chainsaws

Mend > Chainsaws

Mend Chain Into Gas

I poured bar and chain oil into the gas tank,what do I do now?

I poured bar and chain oil into the gas tank of my chain saw,what should I do now?

Ralph Finocchio
April 2008
Garden Tools, ChainsawsChain Into Gas
If you did not try to start it then dump out the oil and wash out the tank with some mixed gas. If you did try to start it then wash out the tank and put some mixed gas in it and if it has a primer bulb on it push the primer a bunch of times and then try to start it. if this doesn't work you will need to take off the carb; clean it and try to get as much oil out of the fuel line as possible. If you try to do this you need to be careful not to loose the little inlet screen on one side and remember how the diaphragms go back on. This is extremely important!

Brian J.
April 2008
If you did not try to start it then dump out the oil and wash out the tank with some mixed gas. If you did try to start it then wash out the tank and put some mixed gas in it and if it has a primer bulb on it push the primer a bunch of times and then try to start it. if this doesn't work you will need to take off the carb; clean it and try to get as much oil out of the fuel line as possible. If you try to do this you need to be careful not to loose the little inlet screen on one side and remember how the diaphragms go back on. This is extremely important!

Brian J.
April 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Chain Into Gas

Mend Garden Tools, Chainsaws
Click here to mend chainsaws
Mend hot cool completely

235e wont start when hot?
Mend spear jackson blade

how do i tighten the on a spear and jackson electrick chane saw?
Mend fuel replace help

carberator removal?
Mend cutting revs drop

Stihl ?
Mend spark carb air

Chainsaw missing gasket & plug gap?
Mend find user manual

How can I find a user manual for the PP350 elec chainsaw?
Mend pull model start spark

Gardenline cs5300b-4 hard to pull chord?
Mend Garden Tools, Chainsaws

Portland Electric pole saw?
Mend chainsaw oil gas

Whats mixture for wolf 38cc chainsaw?
Mend Garden Tools, Chainsaws

Whats the oil to ratio mix for wolf 38cc ?
Mend correct check valve

Husqvarna 235?
Mend Garden Tools, Chainsaws

Xh2xs.0454ra?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.

Related Categories

Mend Grass Trimmers
Grass Trimmers
Mend Hedge Trimmers
Hedge Trimmers
Mend Irrigation Systems
Irrigation Systems
Mend Lawn Mowers
Lawn Mowers

Mend Garden Tools, Chainsaws
Click here to mend chainsaws

Try fixfault.com to fix chainsaws.