Does anyone know where the water valve is on a Vokera linea 28. ?
The pressure guage has dropped and I need to top up the system, but I can't see the tap. There is a flexible hose below the boiler and a black valve marked boiler - filling loop. Moving this to filling loop doesn't start the flow of water. Where is the inlet tap ?
this tap as a tendency to block up .point tap up to boiler say to 12 o clock and the pressure should go up . if it is blocked it may fill very slowly
paul
October 2006
you should have a filling loop installed from the cold feed pipe to the ch flow pipe when the pressure drops below the correct amount turn the black handle on the valve till the guage reads 1.5 bar if it persists you have a leak somewere on your sytem check all the joints and rads to be shure ok .
tony joint south wales
October 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
