"try pushing hi temp scrub, then air dry, then hi temp scrub, air dry"
Mark's answer from Jan 2010 seems to have worked for my Kenmore dishwasher model 665 17592200. Thanks, Mark!
David
November 2010
What buttons do I push to reset my Kenmore Ultrawash Dishwasher #665.17024403. The clean light is flashing.
Mark
January 2010
for kenmore elite, ultrawash models, try pushing hi temp scrub, then air dry, then hi temp scrub, air dry - all lights should come on. Close door and hold in start button for 5 seconds or so - display will show 'd1' and it will go through a diagnostic cycle.
Chris
September 2009
last post was almost complete.
i did that... heat wash then heat dry, repeat once, all lights should be on now. Close the door shut and hit 'start/resume'. It should run through a quick, what appears to be a diagnostic, then machine starts. Pocket that $80 : )
Cheers,
tbeckle
tbeckle
April 2008
push heated/dry then normal wash,then repeat it one more time and this should fix it.
barry
October 2006
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
