the pressure guage on the boiler keeps going to 3 & water keeps dripping out of the relief valve.I have drained the system to take it down to 1 bar, but when the heating comes back on it goes back up to 3 bar. Does anyone out there know how to fix this problem. Thanks Kev
Further thoughts. Is expansion vessel seal blown so no space behind diaphragm for expansion, or simplest possibility, is the fill permanently connected to mains, and the shut off valve is letting by. My daughter has this boiler, and with fill pipe disconnected from the valve, the valve lets by so needs a cap.
Gonky
March 2011
Could be the expansion vessel needs to be larger
Gonky
March 2011
Automatic Answer
We may have found other answers which could help you.