Where does the little silver bit fit in the switch of a qualcast power trak?

Fits in the top half of the assembly to which the handle is fixed. Hold this half so that you are looking at the inside with the red button top right. The handle is on the right. Hold the "L" spring so the foot of the "L is on the left and the foot points away from you into the assembly. Now position the spring so its right hand end is a few mm from the end of the red plastic tail coming off the button and parallel to it. The foot of the "L" now inserts into the assembly and the black pointy head that is part of the lever rests on the right hand end of the spring. (needs a diagram! )

Puzzle solver
May 2011

Contact Qualcast Consumer Care on 08447360108. If you need any parts visit our website below.

GardeningEssentials.co.uk
September 2010