DeLonghi Magnifica 4400 / Fix the infuser?

I know this question is 6 years old, but I have to thank Brendan for his answer. He saved my life.

Krzychuu
March 2016

I have a problem that is says generic alarm on on esam 4400

any idea how to stop this

mike
August 2015

Thank you Archie.Turned on and machine reset and i was easily able to put infuser back!

martin
January 2015

Turn the machine on
Press and hold both of the single and double espresso cup buttons
After 2 seconds you will hear the infuser moving
It may stop and still be in the wrong place, turn the machine off, back on, and repeat.
It took me 3 times, but the machine reset itself, perofrmed the cleaning cycle and is now working fine.

Archie
February 2012

fuser stuck in the down position & unit wont cycle through on start up

Geordie
January 2012

Thank you I went and bought a new infuser as I could not see the infuser in my coffee machine, and when i got it home it would not go in. I just read you answer and I turned the machine on as you said and the infuser was always in the infuser and now it works. So now I have a new infuser incase that one ever breaks.
Thank you so much

Janice Kelly
February 2011

bsc appliances 07779933829

bsc appliances
January 2011

call 07779933829 we repair

bsc appliances
January 2011

I had a similar issue.
Insert the tray and grindings catcher, close the front door, then plug the cord into the power point.
Turn on the power for the power point, but don't turn on the machine.
The machine will go through a self check, then self reposition the infuser holder/bracket, then turn itself off.
If you then open the front door, you should be able to reinstall the infuser.

Hope this helps,
Brendan

Brendan
October 2010