how can i fix my sl compact alarm?

Just moved in an unsure of previous alarm code or if it was used, pressed all buttons nothing works power light is red and day light is green want to reset to use please

Katy
August 2016

HI I want to turn of the sensors to some of the rooms as i now have a small dog, how can i do this or can i set the sensors to only pick up at a certain height

Thanks
Mark

Mark
June 2016

Hi. I have sl compact home alarm, a our went down so I got a replacement. Wired it up after tamper went off. Had power to put at first but then lost it. Tried to reset at panel but instead of one pir showing fault, they all were. I then checked all pir's and they were all out. Opened keypad panel to see if there was a trip switch, nothing. Put panel back together, power and tamper lights are on but pad is dead now too. Help.

Paul W
December 2013

How do I reset the code

How do I reset the code
December 2013

I have a sl compact alarm and don't no how to set it for a night time so that the alarm is on downstairs and off upstairs. can anone help me as I've no manual.

jen
June 2011

Hi bobby
go around your house and check that all the passive infrared sensors are 1:intact/undamaged 2: that all the covers to each sensor, alarm control box and bell box are secure also check the control box and bell box is secured to the walls which they are affixed as they have an anti rip off switch at the back of each unit, failing that you will have to check the tamper circuit in each wire leaving the control box as a broken wire may be the problem the wiring would be better entrusted to an engineer as the components very rarely breakdown on the tamper side it's just a switched loop in each unit break the loop tamper is activated if you manage to find problem the alarm will reset itself automatically Hope this helps

Andyc2904
October 2010