epson C42 Parts at end of life?

hi there just browsing and saw ur prob,, i had the same prob, and downloaded this program to reset the the waste ink pad, good luck
If u do a search for "sscserve" or even try epson ink resetter u will find the program to do the job good luck

shaun
August 2008

Fix it for £12.50.

Pop along to TheServiceManualShop-dot-com (http://www.TheServiceManualShop.com) and buy a rescue kit for your machine. It tells you how to remove the ink pads fopr cleaning instead of replacing with new ones, and provides the software to reset the ink counter which has reached it's limit.

£12.50 is much less than a new printer!!

Mike Burton
September 2006

Open it up and check the waste pads, see how bad they are. If they are not soaked do not worry about it.
The pads are only designed to soak up so much ink,, after which time ink will possibly overflow the pads and onto the bottom inside of the printer. Worst case scenario some may come out from the bottom eventually.

James
May 2006

Bin it and buy a newer model, as you said it'll probably cost more for the spare parts not to mention the hassle of having to repair it yourslef. You can pick up an epson D68 for about £35 if you shop around (try www.scan.co.uk)

Steven Graham
May 2006