how do i put pressure into my main combi 24 he boiler. Do i need any tools?
my boiler (main combi 24 he) as been working fine for 3 yrs, recently the flame failure light has appeared flashing red, although some days its ok, i also noticed the boiler has leaked very slightly, and the pressure bar gauge is nearly on o.o. Please help
thankyou for advice mr k, all ok now thankyou, although now and again the red flame failure light comes on, any ideas please.
Thankd darren
darren
January 2010
there must be filling loop under boiler or in under units , it look like silver flex pipe with knob on one side or both side. open and fill pressure to 1.5 bar than close it.
Mr K
January 2010
pressure loss gauge,
Please note the pressure was only lost due to i accidenty released the pressure, by turning the red bar button with the (3) on it.
darren
January 2010
I can answer this question...
how do i put pressure into my main combi 24 he boiler. Do i need any tools?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.