When the heating is on , the water pressure rises from 1.2 bar to 3.0 , the window flashes blue with code FO 3.0 i assume this means the pressure is too high , what causes the pressure to rise , the domestic hot water side of the boiler works ok.
all the lights are off on my boiler and is not working what can i do please thanks for ur help
roy
January 2010
Hi Dave,
Thanks for your help , it appears the vessel was plugged with black gunge , flexi was ok , cleaned it all out , kickspace unit fitted all working ok now.Thanks for your help and info much appreciated.
steve blake
January 2010
Thanks Dave, i will check after chrimbo , need to drain system to do it , gert does not want me to meddle with it till then , i am going to add a plinth heater to system while i am at it will let you kmow what i find , by the way it does have a flexi hose to the vessel but the rear connection is at the back of the boiler, looks a bit of an arse to get at!!!
Steve
December 2009
drain off a radiator at bleed valve and pressure should drop ,your auto fill may be open or stuck
madtyke
December 2009
hi dave here.The heatlines that have a silver flexi hose connected to the expansion vessel in the boiler are prone to blockage !! this is one possibilty. Checking vessel is also a must do.
dave.
December 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.