Recent: Home max fs506x?

Mend > Washing Machines

Mend Hotpoint WMA34 Machine Control Board

Hotpoint washing machine wma34?

hotpoint wma34. Changed control board, brushes and door interlock. When programme "b" Boil wash selected pre wash light is illuminated. All other programmes seem ok

propulsionman
December 2009

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Hotpoint Machine Control Board

Related Questions ...

Mend slug washing machine
4

Slug damage to Hotpoint washing machine?

My Hotpoint WMUD962 has been damaged due to a slug crawling on to the electronic module (control board) and Ho... [Read more]
Mend washing machine control board repair
2

hotpoint wma50 board connections?

hi i have the above machine i removed the front control board and have forgotten how the connectors go back in... [Read more]
Mend washer dryer program
2

How can I fix my Hotpoint washer dryer, wd860?

Why doesn't the washing machine fast spin. It follows the washing program up to the point of a fast spin at wh... [Read more]
Mend water machine cycles
1

Hointpoint BHWM129 not filling with water?

The machine works on all programs except the 3 eco cycles (9,10 & 11), if these are selected the machine does ... [Read more]
Mend hotpoint ultima problem
2

Motor Short on Hotpoint WT960P?

5 year old Hotpoint Ultima WT960P washing machine. Problem started with an F-01 (short circuit motor triac) fa... [Read more]
Mend washing machine error code control board
1

Hotpoint WT 741 intermittent f-08 error code?

I have a Hotpoint WT741 washing machine and I was getting the f-08 error code. I was told it was probably the ... [Read more]
Mend hotpoint machine control
3

HOTPOINT WMA 20 WASHING MACHINE?

I NEED A GUIDE TO THE POSITIONS OF THE ELECTRICAL CONNECTORS ONTO THE CONTROL BOARD PLEASE.
Mend washing machine motor brushes control board
1

Hotpoint Aquarius WMA34P?

Would not spin. Replaced brushes on motor, cleaned out bottom filter. Ran empty wash but when programme cycle ... [Read more]
Mend washing machine control board Hotpoint
1

how can I change my Hotpoint WF340 Control board?

My washing machine Hotpoint WF340 won't finish the cycle. The suggestion was that teh control board behind the... [Read more]
Mend problem dryer bit
1

Hotpoint WD61 motor fails to run?

Problem with Hotpoint WD61 washer dryer: this may be a bit old now but it’s quite “low mileage” and does... [Read more]
Mend washing machine power
1

how can i fix my hotpoint wma32 washing machine ?

I have changed the bearings on my washing machine.I switched on the power and it filled with water.Then all po... [Read more]
Mend hotpoint final fast
13

Hotpoint wd440 refuses to go in to final spin?

I'm stumped by my hotpoint WD440 washer/dryer it will go through any cycle until it gets to the final spin, it... [Read more]
Mend machine second check
1

Hotpoint WM19P motor wont do anything?

I have just brought this machine (second hand) and thought i check it over took the lid off and done a quick w... [Read more]
Mend washing machine leaking drainage
2

Hotpoint WM63 continuously fills and leaks through door?

My Hotpoint WM63 has recently starter "sticking" mid-cycle. The control know seems to get stuck. It then stop... [Read more]
Mend washing machine control board spin cycle
1

How can I fix Hotpoint WMS 38?

This machine starts the pre wash and wash but does go on to the rinse and spin. I can get it to do a fast spi... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...