I have changed the bearings on my washing machine.I switched on the power and it filled with water.Then all power went off.There is still 240v going to the control board but still no lights or operation.Any ideas ?
if you have put a wire on wrong it would have filled,
but then when power sent to wrong wire ? , it would have tripped electrics...and probally blown circuit board..
you need to take out board and have a look at it..
remember power off.......power offffffffffff
greg
greg
July 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
