moved in recently.To stop the alarm going had to take off the fuse. Now I want to activate the alarm do not know what amp was the fuse and tried few nos. the power doesn't on. can someone help pls.
IN THE MANUAL IT SAYS ; THERE ARE FOUR FUSES MOUNTED ON THE CPU CIRCUIT BOARD. ALL ARE 20mm QUICK BLOW.
THE TOP FUSE MARKED KEYPAD IS RATED 1 Amp AND PROTECTS THE 13V SUPPLY.
THE 13V AND SPEAKER AND BELL AND STOBE OUTPUTS ARE EACH PROTECTED BY A 1AMP FUSE AS MARKED ON THE PCB.
THE BATTERY PLUS VE INPUT LINE IS PROTECTED BY A 1.6 AMP FUSE MARKED BATT ON THE PCB WHICH WILL BLOW IF EXCESSIVE CURRENT IS DRAWN FROM THE BATTERY OR IF THE BATTERY IS REVERVED POLARITY CONNECTED DURING INSTSALLATION.
DOES THIS HELP?
WARRIOR
November 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.