my washer dryer indesit widl126 s uk is not working?

I HAVE A WIDL126S INDESIT WASHER/DRYER.SOMETIMES THE DRYER DOESN'T DRY PROPERLY.I REMOVED THE CHAMBER WHERE THE AIR IS DRAWN FROM THE DRUM AND HEATED,THIS HAD SOME FLUFF IN IT WHICH I REMOVED.THIS SEEMED TO FIX THE PROBLEM FOR A WHILE.
ITS NOW DOING IT AGAIN ERRATICALLY,THE HEATER HAS AN OHM READING OF 41ohms AND THE FAN IS WORKING OK.
ANY IDEAS?????

paul mcardle
December 2009

If that is the case then you have a problem beyond the scope of the average DIY'er. You need qualified assistance, I would suspect the control module.

Mike
October 2009

no its being pumped out .Hose is at the correct level .

conor
October 2009

Check correct positioning of the drain hose. It explains clearly in your user manual! If it is too low water will fill but run straight out again.

Mike
October 2009