Recent: Safely remove screen protector from a Macbook Air?

Mend > Lighting

Mend Wiring Electrical Switch

my two way new switch wont switch off at other switch?

I have wired the switches in parrallel mirroring wiring positions but when switching the light on at either end the opposite switch will not switch off the light. help

Mark
October 2009
At one switch there should be 2 extra wires, one goes into L1, the other to L2.

Adam
October 2009
Old wiring colours - make sure the yellow goes to Com on both switches.
New colours - make sure the black goes to Com.

John
October 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Wiring Electrical Switch

Related Questions ...

Mend replace hoover water
1

replace inlet valve on hoover 2005?

one or both of the water inlet valves are not working, originally the water would not stop filling, then it wo... [Read more]
Mend iz 12 fault
1

zanussi iz 12 fault code 2nd reply ?

hi again ck i checked the pressure switch hoses no visible sign of leaks /cracks/wear/etc then removed the wir... [Read more]
Mend mowing drive belt
3

Westwood T1800H won't turn over?

I'd been mowing for ca. 1.5 hrs and the drive belt to the hydrostatic transmission slipped off - whilst in mow... [Read more]
Mend not engage deere
1

My PTO will not engage on my 155c John Deere?

I need help determining why my John Deere 155c will not engage the PTO. I have changed out the PTO switch and... [Read more]
Mend How to mend it?
6

DeLonghi TRD2000T oil filled heater trips mains switchboard RCD?

This 2000W oil column heater has a small and large heater element. Power settings I, II & III presumably use... [Read more]
Mend find vacuum cleaner model
2

Where can I find a wiring diagram for an ORECK Vacuum Cleaner? ?

ORECK Model XL 9800 - Seriel # 917868 - 4 electrical leads are attached to the metal housing (2 red and 2 whi... [Read more]
Mend help wrong voltage
2

Pro-Form 530i treadmill is inoperable?

Can you help me find out what's wrong with this treadmill? Conditions: line voltage is (120vac) measured and ... [Read more]
Mend short turn light
1

How to change an electrical socket?

There is a floor lamp that seems to have a short in it. When we try to turn the switch on, the light flickers... [Read more]
Mend lights stopped working switch
5

Ceiling lights stopped working?

Hi there The ceiling lights in our bedroom stopped working and apparently there was a popping sound from th... [Read more]
Mend tumble dryer wiring bosch
1

Bosch WTA 2000 Tumble Drier wiring ?

On the back plate of the drier can you plese confirm witch electrical terminal 1 to 4 each of the remaining 4 ... [Read more]
Mend wiring diagram light
1

fitting a bathroom fan?

i want to fit an electrical timer fan in my bathroom. could i get a wiring diagram wired through the light sw... [Read more]
Mend renault megane electrical
2

renault megane '99 electrical fault. radio, clock, odometer memory resets?

i recently changed the radio in my megane, and it worked for a while, but when i had a problem with my hazard ... [Read more]
Mend boiler pcb pressure
19

40 60 80 error on Chaffoteaux boiler MX2 24FF?

I have the above boiler displaying a 40 60 80 error message on the front panel. From the instruction/user manu... [Read more]
Mend developed checked wiring
1

My shower seems to have developed a slight electrical current, why?

My shower is generating a slight electrical current (haven't used it since I noticed!) I've checked the earth ... [Read more]
Mend hp engine craftsman
3

Stopping a 8 HP Briggs & Stratton Snowblower engine?

I inherited a Craftsman snowblower that needed some work. I have replaced parts and have it running; but must... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Lighting ...