hi again ck i checked the pressure switch hoses no visible sign of leaks /cracks/wear/etc then removed the wiring from the heater element m/c still not going although it tries to empty then stops + sometimes it just makes an electrical humming sound but nothing goes. with the heater wire removed i re-did the previous secquence u told me to do + have a new fault code number its E 31 does that make any sense to you,have u any more solutions to the problem hope 2 hear from u soon iv m/c stripped down in my kitchen
E30's are pressure switch related.I have seen pressure hoses wear on the edge and become thin and cause this fault but you say they are OK.Have you tested the element resistance across terminals and to earth?.could be pressure switch issue or PCB issue.put the machine back in test mode as already described to you.each position clockwise performs a test on each component.try that and see what happens.if you have back off be careful on fast spin test etc
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.