Bosch WTA 2000 Tumble Drier wiring ?

Mains Terminal Block on back plate:

Terminal 1 Live = Brown/White to Loom

Terminal 2 Negative = Light Blue to Loom + Dark Blue to Heater Element cut out switch.

Terminal 3 = Not used

Terminal 4 = Black/White to Loom + Thermal control unit wire No 1

Heater Element

Left Hand Terminal No 1 = Thermal Control unit wire No 2 + Black wire to loom (Temperature High/Low switch)

Left Hand Terminal No 2 = Red to loom (Temperature High/Low switch)

Right Hand combined Terminal's = 2nd Dark Blue wire from heat cut out switch.

Rick
May 2009