I have a hoover optima wash system {oph714d} only 15 months old?

My problem is absolutely no power at all. Checked plug and fuse and even tried the plug in a different socket. No problem on last cycle too so it's come as a shock. Normally when had a problem before it would show up an error code so I could look up and fix the problem myself.

claire
April 2016

I have a hoover optima - 2 years old and water is coming over the top of the drawer - this is the second time, but my soap goes in the drum and drawer is cleaned to stop conditioner blockage!

suzysuze
May 2014

Eo3 keeps coming up on my oph714d washer can any one help

angus campbell
October 2013

I found that the element sits on top of the water outlet from the drum and the lime scale and lint on the element were slowing the draining triggering E3 error. Removing the element and dipping it into kettle descaler for the night solved the problem.

palcsaky
July 2013

had the same problem turned out to be misses breast pad jammed the outlet pump cleared it and works fine now however the seal on the filter cover is shocking and would not seal on refitting had to over tighten it to get it to seal!

chris
March 2013

e03 is pump full stop could be an air lock but its the pump pump eo7 element

kev
April 2012

e03

stuart
February 2012

does anybody know what the E07 is on this machine?? it keeps coming up on screen....... Hoover Optima Wash System

Mark Jackson
September 2011

Same with mine, about 18 months old, filter, pump and drain are okay, only happens about every 3rd wash, just turn off and it resets. Seems a common problem. Sort it out HOOVER!

John Beer
August 2011

try checking the pressure chamber its linked to a small air pipe that goes to the pressure switch they do get a bit mucked up from time to time

CHRIS ROBBINS
March 2011

i have the same problem have checked all piping and pump everything is okay hoover want 110 to come anbd have a look any one worked out what the problem was thnks

forty8
November 2010

any 1 with a hoover you get 5 years parts its the pcb boards thats gone

paul
August 2010

I have the same problem. E03 message come up mid way through cotton and coloured cycles. Check hose and filter. All ok and clear. Is there a way to fix?

Lisa
August 2010

We have the same problem with our 18month old machine. It's not the drain hose or filter and the pump has been replaced. Seems to be a common fault here. Very expensive with call out in the region of £100 plus other labour charges on top. We are reluctantly replacing the machine as we don't want to throw good money after bad. Have found an AEG with 5 year warrently thrown in!

Tricia
July 2010

I have been having this problem for some time. pump is fine / hoses are clean / drium is clear / outlet is free flowing, I have come to the conclusion the pcb is at fault, it can be overriden by selecting rinse and then works fine, but rinse in the wash cycle is a no go, as with all these faults just past the 12 months warranty!!

Robin
June 2010

We have the same problem. Checked all the pipes, pump, filter... Nothing wrong. Have you had any luck finding out the problem with your machine? Our machine is just over 12 months old!!!!

Fern
April 2010

Us Too, 14 months old, error code 03, changed pump, no joy, blew out level sensor tube worked for 3 days. turns out to be PCB!!!! Thank you hoover. The Manager of Comet in Southend end said they may only last 14 days. very reassuring

Tom
November 2009

Similar problem, mine will not drain on any program, E03 appears.
Filter and hoses clear, pump not rotating. Got voltage going to pump looks like pump motor open circuit.

My washer has developed this fault tonight, 12 days over its 12 month warranty. Will be interesting talking to their service department in the morning.

Not been able to get a part number for the pump but reckon somewhere between £20-£30.

Ray Garrow
October 2009

e3 code is water drain problem 3 minute time out. check drain pump filter hoses etc

washertech
October 2009