The poster said they can turn the dial on by hand and it then drains and spins. If pressure sensor was blocked it would over fill. Pump is not blocked as poster states. Poster did not come back to advise if he followed my suggestion in previous post i.e. check the drip dry switch is on normal. If it is not then machine will stop and not drain or do final spin. He may get a better result if he answered the first suggestion instead of starting a new post.
Lincoln Appliance NZ
June 2018
could be the pipe from the bottom of drum up to the pressure switch is blocked, it tells the machine how full/empty the drum is of water. remove machine top cover to see it connected to the sensor switch somewhere behind the front panel at the top. Or blocked pump filter or load too heavy.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.