My Linea Vokera 24 boiler is not working. The water pressure is at 2. It's meant to be between 1 and 1.5. Is there anyway of repressurising the boiler?
you can do this by either finding a drain off on the system and letting some water out of the system or put a jug under one of the radiator bleed vents and open the vent with a radiator key. But dont take the pin all the way out Have someone to watch the gauge on the boiler until it drops to 1.5 bar make sure the boiler is off and cold before you start good luck
steve
September 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.