Recent: Safely remove screen protector from a Macbook Air?

Mend > Gym/Fitness Equipment

Mend Carl Lewis CL-8000 Switch Machine Flashes

Error message on carl lewis treadmill?

I have a Carl Lewis treadmill and when I switch it on the machine beep continually and everything flashes. An error code comes on E07. If I lift the safety magnet and put it back on the beeping stops for a second then starts again, hope someone can help!

Angela Raynor
February 2009
Carl LewisCarl Lewis CL-8000Leisure Equipment, Gym/Fitness EquipmentSwitch Machine Flashes
steve thank you not used for while you are right

linda
November 2018
Error message E07 code staying on an peeping not working how do I reset

Ali
February 2016
thanks :D so now i need to find the safety cable

jack
October 2012
Its because the magnet on the end of the red string is not in place on the yellow disc on the control panel. This is a safety cut out device designed to stop the machine if you fall off the treadmill. Hope this helps anyone else with the problem (as was the case of myself :) )

Albi
July 2012
Its because its missing the safety cable - the red string that stops the treadmill if pulled off.

SteveMc
February 2011
Did you find out after, I got same prob?

Dave
March 2009

Related Questions ...

Mend washing machine bosch drain pump
1

Cause of Ready light flashing on a WFG2420 washing machine?

Hello,please help with a Bosch WFG2420GB washing machine fault diagnosis. The 'Ready' light started flashing... [Read more]
Mend dishwasher cycle drain
1

The Rinse/ drain light flashes after a few minutes and the cycle stops?

When I switch the machine off and then on again and start a new cycle, it works well for a few minutes, then ... [Read more]
Mend beko press start
1

beko ecowmb81445lw?

So, I load my washing, press start, start symbol appears on display but no door lock symbol and nothing happen... [Read more]
Mend washing machine error repair
1

Hotpoint wf540?

I have a hotpoint wf540 washing machine. Immediately I turn it on at the mains the top 4 lights out of 5 rapid... [Read more]
Mend washing machine pump filter
2

Hotpoint wd440 reduce creases light flashing ?

any assistance appreciated. on any cycle - after 20 secs the reduced creases light flashes and I have to switc... [Read more]
Mend washing machine blockage drain
2

How to Fix my Hoover HNL6166-80 washing machine?

Starts cycle but at first water drain it stops and delay light swhich flashes. Even on Spin only cycle, Pump d... [Read more]
Mend washing machine repair fault
4

Fixing Miele Honeycomb W460 Washing Machine?

My washing machine is approximately 9 years old and it has developed a fault. When i switch it on the drum spi... [Read more]
Mend dryer year cycle
1

Zanussi washer dryer WJD1257 E10 fault?

We have 7 year old Zanussi WJD1257 it washes well but has fault when drying. During drying cycle machine stop... [Read more]
Mend washing machine miele drain
1

Miele W864 check inlet light flashing?

Machine washes ok. On rinse cycle machine fills, rinses and drains. On second fill it starts to fill then chec... [Read more]
Mend miele washing machine
1

How can I fix my miele washing machine?

The rinse indicator keeps flashing. When I switch the washing machine on, it fills up then drains, the rinse i... [Read more]
Mend start light door
1

Not starting?

I cannot get my servis m6504 washing machine to start the start light flashes constantly. A new door switch ha... [Read more]
Mend washing machine fault flashing light
1

Flashing light on Hotpoint WF541?

Please can you tell me what the fault might be, machine has power light which wont switch off but wont start, ... [Read more]
Mend washing machine door seal hotpoint
3

Hotpoint wf840 will not switch on?

have just changed the door seal on machine and after putting back together it will not turn on, power is going... [Read more]
Mend washer dryer program
1

Problem with Indesit washer dryer WD10 [UK]?

The program dial keeps revolving and the LED flashes 5 times. Which is error code 5, indicating trouble with t... [Read more]
Mend zanussi zwf machine light
1

How can i make my Zanussi ZWF 1621W work?

Zanussi ZWF 1621 W When you switch the machine on, after a short delay, the "End" light flashes 11 times befo... [Read more]
Mend carl lewis treadmill

How can I fix my Carl Lewis treadmill?
Mend carl lewis work

Carl Lewis treadmill error e02?
Mend carl treadmill showing

What does this Error code mean? E03?
Mend Leisure Equipment, Gym/Fitness Equipment

Carl Lewis treadmill?
Mend carl treadmill 566

my carl lewis treadmill model mot 566?
Mend hello carl lewis

Where we can find the fuse specefications one in front near power button?
Mend where parts carl

where do i get parts for a carl lewis multi gym?
Mend treadmill error code fitness

carl lewis treadmill mot566 error e05, what does it mean?
Mend sound back roller

my carl lewis mot566 is making a cracking sound at the back roller ?
Mend spares buy spare

spares for rowing machine?
Mend rowing machine carl lewis

Rowing machine slipping?
Mend front button hello

Where we can find the fuse specefications one in front near power button?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Gym/Fitness Equipment ...

Other models...

Carl Lewis 566Carl Lewis MOT 566Carl Lewis MOT20Carl Lewis MOT25Carl Lewis MOT566

Related Categories

Mend Bicycles
Bicycles
Mend Camping Equipment
Camping Equipment
Mend Fishing Gear
Fishing Gear
Mend Skiing Gear
Skiing Gear
Mend Sports Equipment
Sports Equipment

Topic

Carl Lewis CL-8000 Treadmill Error E07 - Fix