Recent: Will I need to replace my garden tap?

Mend > Washing Machines

Mend Machine Spin Cycle Clear

how can i clear the pump?

machine stopped at the spin cycle

Christine
January 2009
This is only for the LG intellowasher 7kg. Start by unpluging your machine, then at the bottom left hand side corner there is a square cut off covered by a plastic lid, start by removing this lid with a screw driver, just pull it out, when lid is out you'll see a round type plug. turn it anticlock wise and remove it, BE AWARE at this point all the water inside your drum will come out. so get some towells and basket to soak all the water, next step is to remove any objets inside the pump and hose, to do this use your fingers to feel if there are any more objects left behind after you have removed the plug (filter) if so try to pull them out somethimes it helps pouring a bit of water into the drum to flush objects out. finally put back plug and turn it clockwise untill tight replace lid and happy washing.

JB_AC
January 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Machine Spin Cycle Clear Machine Cycle

Related Questions ...

Mend washing machine whirlpool pump
1

Washing machine won't spin?

I have a Whirlpool WWDC 9440. It gets half way through a wash cycle, it stops and the 'clean pump'indicator... [Read more]
Mend bosch washing spin
1

bosch washing machine clasicxx 1200?

The cycle stopped on spin as the filter needed to be cleared, thanks to your site I have managed to turn machi... [Read more]
Mend washing machine fault code pump
1

Hotpoint Aquarius WF240P 1400 Spin - Not working - How can I fix it?

I have a Hotpoint WF2140P washing machine displaying a fault code which is Energy Save LED flashing slow, and ... [Read more]
Mend washing machine pump switch board
1

Hoover CA230 Washing machine won't spin?

My Hoover CA230 washing machine pumps the water out but won't spin!. if we put it on slow or fast spin, it'll... [Read more]
Mend e20 error zanussi w
1

E20 Error on my Zanussi ZWF 16581 W?

My Zanussi washing machine had an E20 error come up but the water drained OK but didnt go onto the spin cycle.... [Read more]
Mend washing machine drain pump
1

hotpoint wd51 won't spin properly or drain?

I just did a wash on my hotpoint wd51 and looks like i actually overloaded it, after the cycle it didn't drain... [Read more]
Mend washing machine fault drain
1

Fault with Tricity Bendix AW1400W?

Heard some bleeping in the kitchen today. Washing machine stopped with water in it mid cycle at the point of g... [Read more]
Mend washing machine motor blockage
1

how can i fix my beko washing machine model wm 5140?

hi,my machine a beko wm514 is not spinning,it drained and spun fine then it just stopped the spin light is on... [Read more]
Mend washing machine bosch filter
5

bosch washing machine WVD24520GB/01 not completing program cycle?

WVD24520GB/01 goes through its program until just 1 minute remains but then it stays washing & doesnt complete... [Read more]
Mend washing machine drain error
3

Zanussi ZWF1427W ends wash cycle after 3 mins then drains ?

Hi - Zanussi ZWF1427W ends wash cycle after 3 mins then drains. This happens on EVERY possible wash cycle.The ... [Read more]
Mend washing machine repair beko
3

How can i fix my washing machine beko wm6152w?

beko wm6152w washing machine: washer fills but wont continue thro' set programme to continue washing whe... [Read more]
Mend washing machine bosch pump
1

how can i fix my washing machine Bosh Prescion wg 2020?

going through washing cycle but doen't spin or drain checked filter but its clear is it the pump ?
Mend washing machine circuit board hotpoint
1

Hotpoint washing machine Model No WMA74P?

The Electronic Display is showing SPIN when washer is switched on, cannot clear it so the washing m/c will not... [Read more]
Mend tricity bendix washing
4

What is wrong with my Tricity Bendix AW1202W Washing Machine?

It is only just over 12 months old so is no longer covered by guarantee. It has just started to stop whilst g... [Read more]
Mend washing machine error code drain filter
1

What's a Zanussi washing machine E20 fault?

Originally I had a E40 fault and the machine would not start the spin cycle. I drained the machine using the e... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...