My Kelvinator ECS Washing machine has a leak?

Hi if the machine is leaking it will need to be water tested pull the machine out and whilst running the machine get a friend to lift the machine from the front until you can get your head underneath to see the leak with a torch. just pull it out thats all.
hope this helps

ahmed marinzarmed
November 2008

Remove lower half of back panel. Dry off bottom tray. Run machine & watch inside for where the water comes from. Usual places of leaks on ECS is the short hose from bottom of plastic bowl to the drain pump. If water creeps out from behind or from under the drain pump then it will be the pump diaphragm seal. They used to be available as a spare part. If water drips down from bottom of bowl area & especially if the machine is very noisy when on fast spin, then the main tub seal & bearings will need to be changed.

Lincoln Appliance NZ
November 2008