Pioneer DEH-1950 clock setting?

Not being able to set the clock (even with the manual) was driving me nuts, so thank you all so much for describing what to do! I think it helps also helps to set it at night, when all the buttons are lit up and it is easier to see. It was still a bit tricky, but eventually I got it! Thanks heaps!

Tracy Sam
November 2011

A very big thank you Dave It worked !!!!!!! kisses to you xxx

Lyn from Australia
October 2010

thanks dave, that worked for me.!!!!

Shaun
February 2010

as the manual says, prior to setting clock you need to enter initial settings mode by press and hold source button (volume knob) until unit turns off, then press source button and hold again until function name appears in display, then press function (may need more than one press - just press and release - don't hold) to select clock, then arrow keys left or right for segment and up or down to set digit.

ken markham
April 2009

im in argentina and had the same problem that you. sorry if my english is not so good.
you have to turn off the radio but having the "clock display" on. then, you have to press the big grey button for 3 or 4 seconds (the one that it is used for making the volume up or down). the clock should be able to be set.

mario
November 2008

If it's anything like mine:
* Put keys in ignition and only turn 1 or 2 clicks to power the radio
* Turn the radio "off" if it is on
* Press and keep holding the FUNC button
* Press the On (or Source) button and wait a few seconds
* Let go. The clock should flash
* Use the up/down left/right to get the hours and minutes.
(On mine, when I get the flashing clock and let go, I get other options instead, but I have to go left / right to get back the flashing clock).

Dave, in Auckland
October 2008