I have just moved into a home with this heater I have done all it says setting and resetting using the timer ect making sure tht the clock is the right time but my heating wont go off just when I thought I had mastere it the heating came on at a different time to what I had set it for any ideas???
We have also just moved from GMT to BST - does your Timer programmer know this?
Are you running a timed programme for Domestic hot (Tap) Water? If so that might be confusing things.
As mm says - some systems - especially where the boiler is in an exposed place - have a Frost Stat set to come on a few degrees above freezing to protect the pipes.
The Normal conditions to fire up a boiler for central heating are a combination of Timer AND Room Thermostat. A Frost Stat is wired separately and will override the timer.
To test things - turn the Room stat to its lowest setting and set the timer to off - if the boiler still fires then it will be the Frost Stat.
But wait for the weather to get warmer first...
Peccavi
April 2013
could be a room stat overiding the timer or a frost stat doing the same
mm
April 2013
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.