Mend Tricity Bendix AW1400W Washing Machines

Mend Household Appliances, Washing Machines

Find out how to mend it for free.

Ask Question

Click here to mend Tricity Bendix AW1400W washing machines

Mend Washing Machines

Mend > Washing Machines

Mend Tricity Bendix AW1400W Washing Machine Working

How can I fix my Tricity Bendix AW1400W Washing Machine?

My tricity bendix washing machine stopped working and started to make a beeping noise and the end light is flashing repeatedly, no matter which programme I chose. It takes water but drain it when it stop intaking. Then make 3 beeps and end light is flashing, repeatedly. Checked the brushes, they are ok. Emptyed, cleaned, and drained all the hoses. I have had this machine for 4 and a half years.

Can anyone help me with what this may be?

Cheers

Wei

Wei
August 2008

Tricity Bendix Tricity Bendix AW1400W Household Appliances, Washing Machines Washing Machine Working

Tricity Bendix AW1400W (91478070801) Washing Machine Thermostat .

We usually wash on a number 7 program 40 degree wash. Resently all the clothes are coming out very creased and colours have run. It looks as though it is runnning at a higher temperature wash, probably boil wash??

Can you offer any ideas to what is wrong?

Thanks

Peter

peter
June 2010

Just checked the pressure hose and pressure switch, they are all in working order. I can't locate the heater. Where is it? I chose the cool and quick wash, which is not using the heater, but still have the same problem - water intaking, then draining, then beeping.

Any idear?

Wei
August 2008

Hi ck, I just found it works when I chose spin cycle only. I have checked the pressure switch with multi-meter, and it looks alright. Checked circuit board, nothing was burnt on it. I am going to check the pressure hose later. And I found there will be very littel water remaining in the drum, after it finishes spinning and unlocking the door.

Not sure what will it be this time. Any thought, please?

Regards,

Wei

Wei
August 2008

check the pressure hose and if it is clear check pressure switch.also check heater for low insulation reading to earth,less than 10 megs is a fault

ck
August 2008