Electrolux EW1000l - how do I remove rear panel?

take the lid off (2 screws at back) and you will find 2 or 4 screws hold rear half on to top support frame (remove these screws).remove plastic blanks from the rear middle bottom half and then remove the screws behind them.remove 2 or 3 screws for rear panal at the bottom.release the water and electric cable plastic mounting by pulling it up then pull rear half panel off.fit in reverse.it sounds more difficult than it is as it take 2 mins to remove in reality.ps they are all 8mm nut head screws

ck
April 2008