My Proform 545s belt will not move when I press the start or any of the program buttons. When I put the magnetic "key" in the bubble, it beeps, the displays light up, but none of the keypad buttons such as start, number or program buttons will work. The only button that will work is the incline, but then the incline will not go down. I hope someone can help with this! Thanks
You may have a bad lower board. We need to try a test.
Stand on the side of you treadmill and push the belt with one foot.
Push the start button and keep pushing the belt..
If your treadmill belt starts to run, you may have bad motor brushes caused by a dirty or worn belt and deck.
If it doesn’t start but the speed is being read then you could have a bad lower board.
A loose motor wire could do this too. For further help You can contact me here,
www.mindbites.com/person/214-Mark
Mark Peterson
March 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix gym/fitness equipment.