No, I firmly believe your motor is fine. Check to see if the fuse is blown. Where is the fuse? the fuse can be found on the power control board under the hood of the treadmill. If the treadmill fuse is ok you might need to check the continuity of the earth, live and neutral wires, there could be a break. A domestic treadmill are common to pcb or mcb failures because they are most probably made in china and do not with stand to much lying about. If all else fails and you really really need to eat back into the swing of fitness call the manufacturer. Make sure you provide the model number and serial number that will be found near the off/on switch...All the best!!!
Kurt Verhoeven from ChandlerSports Scotland
June 2009
howtomendit.com for free repair help, information and advice.
