My washing machine fills as normal on any cycle and then it turns the drum quite fast stops after about 5 seconds.Seems dead but then after about 5-10 mins does the same.After this keeps happening i decide to drain the water out of the machine and what i expect is a error code flashes 8 times.Thankyou for any help.
My hoover vt d2 does not spin on its cycle when washing clothes
Janice
April 2017
my machaine hoover vision HD stops during the sycle and the both light the spin speed and timer saver.
tom
August 2012
A big thankyou to Brookie, same problem with my machine, you saved me Hoovers call out charge of £115 (I've only got the 5 year parts warranty, so would have been £115 for no parts and 5 minutes work, I'm in the wrong business), thankyou again
Bill
February 2011
Brookie
Thanks for this. This fixed it for me - brushes were fine but I felt it was a motor problem.
Read your solution - slipped the motor back out and removed the cover of the speed sensor at the rear and found the fault as described.
Thanks again.
Thrash
thrash
August 2010
Unplug the machine. Tilt the machine back and pull down the black plastic cover underneath. On the rear of the motor there are 2 yellow wires going to the motor speed sensor. Remove the speed sensor coil from the end of the motor by pulling it out. Inside you will find that the magnetic sensor spindle has just come out of the centre of the motor. Screw in the spindle (tight) push the speed sensor coil back in.
Hey presto.... it works fine again. (and it didn't cost you a new programmer @ £70 like I thought it was).
Brookie
December 2008
Have a Hoover VHD814 not draining (filters ok). Timer and 1200 spin indicator flashing slowly what is the problem
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.