at the back of the exhaust m/fold .you will have to get a locking pin from ford because of the cut out at the bottom of the pin , if you was changeing the timing chain ayou will need is 3x6mm drill bits to lock in the(2)for the cams and (1) for the fuel pump .
lee
March 2008
you need to remove the cranksensor on the left hand side of the engine at the back
chris
February 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.