It is a very long belt on a transit 2.4 incorporating 7 or 8 different pulleys,I usually draw a small diagram showing the route the belt takes,if I remember right the pulley that releases the tension on the belt is next to the p.a.s pump pulley on the left looking at the engine from the front,I usually use a 3/8 socket bar to ease the tension off the belt,look for a square recess near the pulley to fit the socket bar.
wickham
April 2010
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vans.