How to mend ... Problem Control Panel

worcester bosch 28si II?

recently had a gas engineer out as stopped working altogether with light flashing approx 1 per sec used reset ... [Read more]

please help worcester 28 si II combi?

recently had a gas engineer out as stopped working altogether with light flashing approx 1 per sec used reset ... [Read more]

Simens HB96540GB/01?

Good morning all, Wondering if anyone can advise on a problem I have encountered on the above oven. I re... [Read more]

I have a problem with my Melcom ST6100 alarm control panel?

I have recently installed a melcom ST6100 alram control panel, however whe I attach the alarm box the tamper l... [Read more]

Glow worm 18hxi?

Green light comes on & there is a temperature reading but the green light then goes off again, there is no fau... [Read more]

Control panel - Kitchenaid KUDS01FL?

When I push the button for any cycle on the touch pad (control panel) the cancel button lights up, but not the... [Read more]

potterton EP2000 (old brown one) problem - CH always on ???

I have a Potterton EP2000 - problem is when i try to put the HW slider on any setting i.e twice/ once/ 24hrs, ... [Read more]

Zanussi ZDT6053 Control Panel?

I have a problem with the ON/OFF switch. I'm looking to repair myself. How easy or difficult is it to get into... [Read more]

The fridge part of my fridge freezer is not cold enough?

The fridge part of my hotpoint HM3121 fridge freezer is not cold enough. The back panel had an ice build up wh... [Read more]

AEG oko lavamat 72620 showing Cd on panel?

The control panel is showing Cd on panel have fitted new door lock but is still showing same, any ideas what p... [Read more]

boiler lights, but just ticks over, IE: it won't go to full flame?

The boiler is a Radiant RS24. It lights, but stays on tickover. We've had a new pcb, limit thermostat and heat... [Read more]

to re set after power failure?

after a recent power failure the alarm needed to be re-set,however a failure always kept showing up on the con... [Read more]

Scrapping Noise on the Hotpoint vtd00?

Hi all Ive just replaced the back bearing and the belt but the machince is still scraping noises, i had to t... [Read more]

indesit idf 125 dishwasher wont switch off?

I have a problem with my indesit idf dishwasher, the pump was replaced a few weeks ago because it had stopped ... [Read more]

Samsung B1415J not allowing water to run in?

What do I have to replace to get the water controls to allow the water in? Is it a problem with the water cont... [Read more]

zanussi ZBQ665 electronic programmer not working?

oven, grill, "mains on " switch & thermostat all working fine. Problem is the Electronic Programmer display co... [Read more]

Worcester Bosch 400BF Hot Water Cutting Out?

Hi I have a problem when running hot water it is hot for a while then runs cold then back to hot the CH light ... [Read more]

potterton 3000 control panel?

I have a potterton 3000 control panel . Set c/w and h/w to 24hours . it just seems to click both on and off w... [Read more]

oven?

my whirlpool double oven, bottom oven wont work , control panel keeps reading fo1. have tryed new switch, coul... [Read more]

Asko 1585 wiring schematic?

Does anyone know where I can get my hands on a wiring schematic for this dishwasher? My unit was under the CPS... [Read more]