Asko 1585 wiring schematic?

Does anyone know where I can get my hands on a wiring schematic for this dishwasher? My unit was under the CPSC recall due to potential fire caused by a waxing motor and/or the control panel. A replacement control panel is no longer available so only the waxing motor got replaced. The first time we used the "repaired" machine it went maybe 10 minutes into the cycle and from there it went into pump-out mode and never stopped and we could stop the machine by either the stop/start button or opening the door. All the lights in the control panel flash constantly which, according to Asko, is an F2 fault and can ONLY BE the F2. F2 translates to water in the bottom pan and thus the continuous pump-out cycle.

Trust me there is no water anywhere that it is not supposed to be. I checked the float that initiates the emergency pump cycle and it moves freely and touches the pan. Hence my request for wiring schematic so that I can see if there is a way to jump-out/by-pass the float and see if that is the problem. If someone can tell me how to do the workaround and/or suggest other possible causes it would be greatly greatly appreciated. If it is the control panel I guess it off to buy a new machine but definitely not ASKO.

Thank you for any help!