How to mend ... Plate Top Consequently

Singer Confidence 7463?

Bobbin rotates counter clockwise and I pull thread through slot A. When pulled to the left and finger on top ... [Read more]

rover 75 overheating?

hi i have a rover 75 on an 52 plate 1.8 engine. was driving home from work today and noticed the engine was o... [Read more]

How do I take apart a sunbeam 3970-6; the heat setting slider is stuck? ?

I got off the foot rest but don't know whether to take off the sole plate or the top first. I don't wish to br... [Read more]

edc51 creda?

Hi I have EDC51 Creda cooker I can put top oven on no problems soon as I put the main over on blows the ele... [Read more]

How do I fix the bottom tension on a Brother XR-65?

I've been quilting. I took the quilt foot off & put the regular foot back on, tried to sew two pieces of fabri... [Read more]

How can I fix my grass trimmer?

My grass trimmer is completely jammed. some wire appears to have become wedged under the plate below where the... [Read more]

How to change belt in tumbler dryer ?

I removed the back plate panel, lifted the top of the dryer off, and removed two small screws to release the c... [Read more]

How can I fix my solid hob plate?

One of my solid hob plates is not working... it hasnt for a couple of years since spilling water on it.. can I... [Read more]

peugeot bolt?

i have a peugeout speedfight 2 57 plate i tuke the carb off and wanted to change the reads but the inlet on to... [Read more]

1.2 16v punto 02 plate?

At the top of the rev range on every gear it seems to loss all its power

how do i top up oil level in auto transmission merc c200 diesel 55 plate a?

oil top up due to slight leak in auto trans

how to stop thread from breaking?

I have a brothers se-350 sewing, embroidery machine and the thread keeps breaking it get real tight in the top... [Read more]

whats up with my corsa clutch?

i have a 51 plate 1L corsa and the clutch seems to take an eternity to come up after i depress it to change ge... [Read more]

creda m350ews top oven very slow in getting to temp?

it takes 2 hours for the top oven to attain full temp and the light to go out i have checked the door seal and... [Read more]

what's wrong with my Zanussi hotplate?

one plate on my zanussi top does not regulate itself i.e. it remains on whatever number it's set at.Model zce ... [Read more]

can clutch be adjusted on espace III 2.0 16v?

hi my 51 plate 2.0 16v espace clutch biting point sits at the very top and has recently started slipping/ judd... [Read more]

Unusual Oil Leak on a Fiat Brava 80 SX 1.2L on a "Y" plate. ?

My Fiat Brava 1.2L 80 SX leaks oil from the top of the dipstick hole. Pressure appears to build up inside the ... [Read more]

what could be wrong with fisherpaykel dishwasher has no pwr?

got fisher paykel dishwaher dd603 top drawer has no pwr,cntrl brd is good wire connectors look good also,could... [Read more]

how can i fix my neff dishwasher type sl 1501f?

during a wash the top rotor arm was prevented from rotating by a large plate.now the machine wont fill, and se... [Read more]

Loose grill and protective plate?

I have Neff Oven U1461. The grill and protective plate in the top oven have come lose and consequently bend ... [Read more]